Atdec TH-2050-VFM manual

Atdec TH-2050-VFM
(1)
  • Number of pages: 2
  • Filetype: PDF
  • 70

    Flat Screen Wall Mount | Full Motion

    Installation Instructions

    Component Checklist
    Hardware
    IMPORTANT INFORMATION
    ! IMPORTANT - Install Telehook Wall Mount as per Installation Instructions.
    ! Telehook Wall Mount supports Displays weighing up to 35kg (77lbs), with VESA hole configurations:
    ÊÊÊÊUÊ
    100x100mm (4”x4”) 300x200mm (12”x8”)
    200x100mm (8”x4”) 300x300mm (12“x12”)
    200x200mm (8”x8”) 400x400mm (16”x16”) - using the extensions plates supplied.
    ! The Manufacturer accepts no responsibility for incorrect installation.
    Step 1. Check Components
    Check you have received all parts against the Component Checklist and Hardware above.

    TH-2050-VFM

    Articulated Arm
    VESA plate
    Concrete
    Anchor (x3)
    4mm
    Allen Key
    M4 Washer (x4) Coach Washer
    M8 (x3)
    M5 Washer (x4)
    M8x16mm / M8x45mm (x4 each)
    M4x16mm / M4x25mm (x4 each)
    M5x16mm / M5x25mm (x4 each)
    M6x16mm / M6x30mm (x4 each)
    Coach
    Bolt M8 (x3)
    Mounting Screws
    M4/5 Spacer Bush (x4)
    M6/8 Spacer Bush (x4)
    Drilling
    Guide
    TOOLS REQUIRED:
    ÊUÊ*ÜiÀÊÀ
    ÊUÊ*«ÃÊi>`Ê-VÀiÜ`ÀÛiÀ
    ÊUÊ-«ÀÌÊiÛi
    ÊUÊxÊ
    3
    /
    16
    ”) Drill Bit
    ÊUÊ£äÊ
    3
    /
    8
    ”) Masonry Drill Bit
    ÊUÊ£ÎÊ
    1
    /
    2
    ”) Socket Wrench or Shifter
    ÊUÊ£{Ê
    9
    /
    16
    ”) Socket Wrench or Shifter
    Step 7. Cable Management
    Connect cables to your Display and
    route through Cable Clips.
    Step 8. Tilt Adjustment
    As TFT Manufacturers are constantly releasing new monitor models, Atdec does not accept responsibility if the VESA mounting does not comply with the international standards.
    Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. *ÕLÃi`\ 11.11.09 ©
    Installation Complete
    ,iÛiÊ>LiÊÛiÀÃÊÕÃ}Ê>Ê*«ÃÊi>`Ê-VÀiÜ`ÀÛiÀ]Ê>`ÊÀÕÌi
    the cables along the length of the arms. Reattach the Cable Covers
    to hold the Cables in place.
    Cable Clips
    TIP: Leave enough slack in the cables
    to allow full movement at the joints.
    Your Telehook Wall Mount Articulated Arm installation is complete and ready for use.
    Cable Covers
    Cable Covers
    ,ii>ÃiÊÌiÊ>«ÊiÛiÀÊ>`ÊÌÌÊÌi
    Display up or down as desired.
    Clamp
    iÛiÀ
    /}ÌiÊÌiÊ>«ÊiÛiÀÊÌÊV
    the Display in desired position.
    TILT DOWN
    TILT UP
    LOOSEN
    TIGHTEN
    PULL
    M8 Dome Nut (x4)
    Star Washer (x4)
    ÝÌiÃÊ*>ÌiÊÊÝÓ® ÝÌiÃÊ*>ÌiÊÊÝÓ®
    TIP: If the Clamp Lever is obstructed
    pull it outwards to disengage the
    rachet mechanism.
Atdec TH-2050-VFM

Need help?

Number of questions: 0

Do you have a question about the Atdec TH-2050-VFM or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Atdec TH-2050-VFM owners to properly answer your question.

View the manual for the Atdec TH-2050-VFM here, for free. This manual comes under the category Flat panel support and has been rated by 1 people with an average of a 9.9. This manual is available in the following languages: English. Do you have a question about the Atdec TH-2050-VFM or do you need help? Ask your question here

Atdec TH-2050-VFM specifications

General
Brand Atdec
Model TH-2050-VFM
Product Flat panel support
EAN 39281008924, 666672943955, 881493004733
Language English
Filetype PDF
Design
Product colour Black
Other features
Mounting interface VESA 100mm x 100mm / 200mm x 100mm / 200mm x 200mm / 300mm x 200mm / 300mm x 300mm / 400mm x 400mm
Weight (imperial) 77 lbs
5 years
Pivot 180°/360°/190°
Weight (max) 35 kg
Ergonomics
Tilt angle range -5 - 20 °
Swivel angle range 5 °
Mounting
Mounting type Wall