Pyle PFA200 manual

Pyle PFA200
(1)
  • Number of pages: 1
  • Filetype: PDF
  • Specifications:
    Input power: DC 9~14.4V 2A
    Output Power: 60 W
    Speaker impedance: 2-8
    Frequency response: 20Hz-20kHz
    Total harmonic distortion: <0.4%
    SNR: >80dB

    PFA200

    Class T Amplifier

    The PFA200 uses a Class-T audio amplifier
    IC for low distortion and acoustically
    accurate reproduction of music.
    Tone/direct switching allows for
    customized listening via separate bass and
    treble adjustments — or the original signal
    can be passed through without
    enhancement.
    The built-in loudspeaker protection circuit triggers when the amplifier is
    turned on to protect speakers from high volume bursts of audio.
    Over-voltage protection circuit shuts down the amplifier if input voltage
    exceeds 14.4 V DC.
    State of the art design using surface mount components and advanced
    engineering for proven performance, reduced signal interference, and long
    operational life.
    Front Inputs: 3.5mm (1/8”)
    Rear Outputs: Speaker, RCA L/R, ¼” Mic
Pyle PFA200

Need help?

Number of questions: 0

Do you have a question about the Pyle PFA200 or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Pyle PFA200 owners to properly answer your question.

View the manual for the Pyle PFA200 here, for free. This manual comes under the category Receivers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Pyle PFA200 or do you need help? Ask your question here

Pyle PFA200 specifications

General
Brand Pyle
Model PFA200
Product Receiver
EAN 68889023343, 88020618504
Language English
Filetype PDF
Audio
Audio output channels 2.0 channels
Peak power per channel 30 W
Total Harmonic Distortion (THD) - %
Signal-to-Noise Ratio (SNR) - dB
Amplifier class T
Ports & interfaces
Speakers connectivity type Clamp terminals
Audio (L/R) in 1
DC-in jack
Technical details
Product colour Black
Purpose Home
Connectivity technology Wired
Volume control Rotary
Bass adjustment
Treble adjustment
On/off switch
Power
DC input voltage 12 V
Maximum current 2 A
Weight & dimensions
Width 140 mm
Depth 121.9 mm
Height 45.97 mm

Frequently Asked Questions

Below, you will find the most frequently asked questions about the Pyle PFA200.

Is your question not listed? Ask your question here