Thermaltake Purepower RX 500W manual

Thermaltake Purepower RX 500W
(1)
  • Number of pages: 12
  • Filetype: PDF
>> >>>> >>
Cable Management 500W ATX12V 2.2 Version
TM
Purepower RX
TM
Purepower RX
TM
Thermaltake Purepower Power Supply
TM
Thermaltake Purepower Power Supply
Cable Management 500W ATX12V 2.2 Version
06
05
StepStepStep
1
3.4 Power Supply Installation
1
2
3
After install the power supply unit into the chassis and then connect
the 20+4-pin main power cable to motherboard 20pin or 24 pin socket.
StepStepStep
2
Connect the 4-pin/8-pin +12V auxiliary power connector to the
motherboard. (Users can use either 4 pins or 8 pins, depending on
the motherboard. Please check with the motherboard user's manual.)
3.3 Installation Steps

To prevent electrical shocks, please disconnect the power cord

from your existing power supply unit. Purepower RX Cable
Management 500W PSU has automatic Voltage Selector Which will
automatically change to 100V-240V PSU .

Installation Steps

3.3.1 Ground yourself to remove any static electricity by briefly
touching your PC cases and then, disconnect the power cord
from your old power supply (if replacing it)
3.3.2 Follow your computer case manual and disassemble the case.
3.3.3 Disconnect all the power connectors from the motherboard
and from the peripheral devices such as case fans, hard
drives, floppy drives. etc.
3.3.4 Remove the existing power supply from your computer case
TM
and replace it with your new Thermaltake Purepower RX
Cable Management 500W PSU.
3.3.5 Connect the power connectors to the motherboard and
peripheral devices (refer to the rest of this manual to match
the various one-way key-locked connectors to the
motherboard and accessories).
3.3.6 Connect the 6-pin PCI Express connector to PCI Express
graphic card if you need.
Note: Please read the user manual supplied with your graphic card
for detail usage instructions.
3.3.7 Close the computer case.
3.3.8 Make sure your power supply switch is on "OFF" position,
and connect the supplied power cord to your Thermaltake
TM
Purepower RX Cable Management 500W PSU.
1
2

170 X 140 mm

Thermaltake Purepower RX 500W

Need help?

Number of questions: 0

Do you have a question about the Thermaltake Purepower RX 500W or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Thermaltake Purepower RX 500W owners to properly answer your question.

View the manual for the Thermaltake Purepower RX 500W here, for free. This manual comes under the category Computer adapters and has been rated by 1 people with an average of a 9.5. This manual is available in the following languages: English. Do you have a question about the Thermaltake Purepower RX 500W or do you need help? Ask your question here

Thermaltake Purepower RX 500W specifications

General
Brand Thermaltake
Model Purepower RX 500W
Product Computer adapter
EAN 841163020326
Language English
Filetype PDF
Power
AC input voltage 115 - 230 V
Efficiency 75 %
Power protection features Overload,Short circuit
Hold time 16 ms
Total power 500 W
Other features
Maximum current 6 A
Dimensions (WxDxH) 150 x 160 x 85 mm
Performance
Power supply unit (PSU) form factor ATX
Safety CE, FCC, UL, CUL, TUV, BSMI
Ports & interfaces
PCI Express power connectors (6-pin)
Floppy drive power connector 1
ATX Power connector (24-pin)
Operational conditions
Operating relative humidity (H-H) 20 - 90 %
Operating temperature (T-T) 0 - 50 °C
Storage temperature (T-T) -20 - 70 °C
Storage relative humidity (H-H) 5 - 95 %
Design
Fan diameter 140 mm
show more

Frequently Asked Questions

Below, you will find the most frequently asked questions about the Thermaltake Purepower RX 500W.

Is your question not listed? Ask your question here